TIA-942
Telecommunications Infrastructure Standard for Data Centers — governing site selection, architectural design, electrical systems, mechanical systems and telecommunications cabling for data centre facilities.
IT infrastructure
The physical foundation every digital operation depends on.
HYHUB delivers complete IT infrastructure lifecycle services — from the initial site survey and structured cabling design through server room construction, rack-and-stack deployment, power and cooling engineering to ongoing facilities management. Every deployment follows TIA-942, BICSI and ISO 27001 physical security standards.
Full lifecycle coverage
From site survey to ongoing facilities management.
Infrastructure done right means the technology runs reliably, the physical environment is safe, and the whole setup can be maintained and scaled without starting from scratch.
- Site surveys and environmental assessments.
- Structured cabling design and deployment (Cat6a, fibre).
- Server room design, rack-and-stack, power and cooling.
- UPS and backup power configuration.
- Ongoing facilities management and support.
Infrastructure services
Every stage of the infrastructure lifecycle, delivered to international standards.
Site survey and environmental assessment
What it coversBefore any equipment is deployed, HYHUB conducts a comprehensive site survey that evaluates the physical space, electrical capacity, cooling potential, structural integrity and environmental conditions. This assessment identifies risks, constraints and opportunities that influence every subsequent design decision.
What you getA documented site assessment report with floor plans, power capacity analysis, cooling requirements, cable pathway recommendations, risk register and a clear go/no-go recommendation with remediation steps if needed.
- Electrical load analysis — Mapping available power capacity against projected IT load with headroom for growth.
- Cooling assessment — BTU calculations, airflow modelling and HVAC recommendations for optimal thermal management.
- Physical security review — Access control points, fire suppression, water ingress risk and ISO 27001 physical control alignment.
Structured cabling design and deployment
What it coversHYHUB designs and deploys structured cabling systems that form the permanent backbone of your network infrastructure. All cabling follows TIA/EIA-568 standards and BICSI best practices for Category 6A copper and single-mode/multi-mode fibre optic installations.
Why it mattersPoor cabling is the most common cause of intermittent network failures, slow performance and costly rework. A properly designed structured cabling system lasts 15–20 years and supports every technology upgrade without replacement.
- Horizontal and backbone cabling — Cat6A and fibre runs with proper labelling, documentation and testing.
- Cable management — Trunking, trays, risers and pathway design that allows future expansion without disruption.
- Testing and certification — Every cable run is tested with Fluke-certified tools and documented with pass/fail results.
Server room and data centre design
What it coversHYHUB designs server rooms and small data centres that follow TIA-942 rated design principles. This includes rack layout, hot/cold aisle containment, cable pathway design, fire suppression planning, access control integration and environmental monitoring.
What you getA complete server room design package: rack layout drawings, power distribution scheme, cooling design, cable pathway plan, access control specification and a bill of materials for procurement.
- Rack layout and density planning — Optimal placement for airflow, maintenance access and power distribution.
- Hot/cold aisle design — Containment strategies that reduce cooling costs by 20–40% compared to open rack layouts.
- Environmental monitoring — Temperature, humidity and leak detection sensors with automated alerting.
Rack-and-stack deployment
What it coversPhysical installation of servers, switches, routers, storage arrays, UPS systems and patch panels into prepared rack environments. Every deployment follows manufacturer specifications and HYHUB's documented installation procedures.
What you getProfessionally installed equipment with proper cable management, labelling, power connections, initial configuration and handover documentation including as-built drawings.
Power and cooling engineering
What it coversHYHUB designs and implements power distribution and cooling systems that keep IT equipment running safely and efficiently. This includes UPS sizing and configuration, power distribution unit (PDU) selection, generator integration, precision cooling design and redundancy planning.
Standards appliedAll power and cooling designs follow IEEE, NFPA 75 (fire protection for IT equipment) and TIA-942 environmental standards for the appropriate tier level.
- UPS systems — Sizing, deployment and testing of uninterruptible power supplies with battery monitoring.
- Power distribution — PDU selection, circuit mapping and redundant power path design (A+B feed).
- Precision cooling — In-row, perimeter and overhead cooling designs matched to heat load calculations.
Ongoing facilities management
What it coversAfter deployment, HYHUB provides ongoing infrastructure management including preventive maintenance schedules, environmental monitoring, capacity planning, vendor coordination for hardware support and periodic infrastructure health reviews.
Why it mattersInfrastructure degrades silently. Batteries lose capacity, filters clog, cable connections oxidize and cooling efficiency drops. Without structured management, organizations face unexpected failures that could have been prevented with routine maintenance.
- Preventive maintenance — Scheduled inspections, cleaning, firmware updates and component replacement.
- Capacity planning — Monitoring growth trends and recommending expansions before capacity limits are reached.
- Vendor coordination — Managing warranty claims, hardware RMAs and service contracts with equipment manufacturers.
Standards and compliance
International standards applied to every infrastructure engagement.
BICSI
Building Industry Consulting Service International — best practices for the design, installation and management of telecommunications and information technology infrastructure.
ISO 27001 (Physical Controls)
Information security management system standard — Annex A physical and environmental security controls for secure areas, equipment siting, cabling security and maintenance.
TIA/EIA-568
Commercial Building Telecommunications Cabling Standard — defining cable types, distances, connectors, testing procedures and cable pathway requirements for structured cabling systems.
